Thai Malleable Iron and Steel Co.,Ltd. The High Grade Malleable Cast Iron Pipe Fittings .........
 
High Grade Iron Pipe Fittings
mail to 
tmisco@thaimalleable.co.th
with questions or comments 

about this web site.

 

<=Back    

List of TM Pipe Fittings

FIG. No.

                           NAME

ABBRE-VIATION

NOMINAL SIZE        (inch)

 PRODUCT
102 Elbows, Banded, Equal   BL       1/8 - 8
112 Elbows, Banded, Reducing   BRL       1/4 - 6
122 Elbows, 45° , Banded   BL 45°       1/8 - 6
132 Street Elbows, Banded, Equal   SL       1/8 - 6
142 Street Elbows, Banded, Reducing   BRSL      1/2 - 2
152 Street Elbows, 45° , Banded   SL 45°      1/8 - 4
161 Side Outlet Elbows   SOL      1/4 - 2
202 Tees, Banded, Equal   BT      1/8 - 8
212 Tees, Banded, Reducing   BRT      1/4 - 6

222 Service Tees, Banded, Equal   BST      1/4 - 6
231 Side Outlet Tees   SOT      1/2 - 2
242 45° Y-Branches, Banded, Equal   BY 45°       3/8 - 4
302 Crosses, Banded, Equal   BCR      1/8 - 6
312 Crosses, Banded, Reducingl   BRCR      3/4 - 4
402 Sockets, Banded, with Ribs   BS      1/8 - 8
412 Sockets, Banded, Reducing, with Ribs   BRS      1/4 - 6
421 Sockets, Full Thread, Plain, without Ribs   FTS      1/4 - 6
432 Sockets, Banded, M&F   BSX      3/8 - 2
442 Sockets, Banded, Reducing, M&F   BRSX      3/8 - 2
452 Sockets, Banded, Reducing, Eccentric   BRSE      3/4 - 6
502 Caps, Banded BCA     1/8 - 8
600 Unions,Gasket Type,Flat Seat (without gasket) UN     1/8 - 6
610 Unions,Gasket Type,Flat Seat,M&F (without gasket) UNX     1/4 - 3
620 Unions, Taper Seat, Iron to Iron UNT     1/8 - 6
630 Unions, Taper Seat, Iron to Iron, M&F UNTX    1/4 - 3
640 Unions, Conical Joint, Brass to Iron Seat UNBR    1/8 - 6
653 Unions, Elbows, Flat Seat UE    3/8 - 2
663 Unions, Elbows, Flat Seat, M&F UEX    1/4 - 2
673 Unions, Elbows, Taper Seat UET    1/4 - 2

683 Unions, Elbows, Taper Seat, M&F UETX    1/4 - 2
703 Short Bends, Banded SB F/F    1/4 - 2
713 Short Bends, Banded, M&F SB M/F    1/4 - 4
722 Long Sweep Bends, Banded BE F/F    1/4 - 4
732 Long Sweep Bends, Banded 45° BE F/F 45°    1/4 - 3
742 Long Sweep Bends, Banded, M&F BE M/F    1/8 - 6
752 Long Sweep Bends, Banded 45°, M&F BE M/F 45°    1/4 - 3
760 Long Sweep Bends, Male BE M/M    1/8 - 4
900 Round Flanges, without Bolt Hole RF    1/2 - 6
901 Round Flanges, with Bolt Holes to Table D (BS 10) RFH BS10    1/2 - 6
902 Round Flanges,with Bolt Holes to PN 16 (BS 4504) RFH PN 16    1/2 - 6
903 Circular Flanges,with Bolt Holes to PN 16 (BS 4504) CF PN 16    3/8 - 8
904 Circular Flanges,with Bolt Holes to PN 25 (BS 4504) CF PN 25    3/8 - 8
905 Circular Flanges,with Bolt Holes to PN 40 (BS 4504) CF PN 40    3/8 - 8
906 Floor Flanges FF   1/4 - 2
907 Oval Flanges OF   1/2 - 2
909 Gasket Type Flange Unions, with Bolts FU   1/2 - 6
910 Locknuts LN   1/8 - 6
920 Bushings BU   1/4 - 8

921 Inside Head Bushings IBU   1 - 8
930 Plugs P   1/8 - 8
931 Solid Plugs SP  1/8 - 3½
933 Slotted Head Plugs SHP   4 - 8
940 Hexagon Nipples, Equal NI   1/8 - 6
941 Hexagon Nipples, Reducing RNI   1/4 - 4
942 Long Screw Sets LS   1/2 - 4

943

 Compression Couplings, Regular Type CCR   1/2 - 2

944

 Compression Couplings, LongType CCL   1/2 - 2

Tables of Dimensions Specification (Tables Attached)

   1) End Shapes, Threads and Spanner Flats for BS EN 10242

 

 Nominal     Size      (inch)     

        Minimum Thread                Length  Minimum      Wall  Thickness    J (mm)      Bands or Beads  Spanner      Flat  Minimum    Depth     (mm)
 Minimum    Height    h (mm)  Minimum     Width    W (mm)
   Female   N1  (mm)      Male      N2  (mm)
      1/8           4.4       5.6       1.8       1.0       3.0        4
      1/4        6.7       8.4       2.0       1.3       3.6        4
      3/8        7.0       8.8       2.0       1.3       4.0        5
      1/2        9.1      11.4       2.0       1.5       4.6        5
      3/4       10.2      12.7       2.2       1.5       4.6       5.5
       1       11.5      14.5       2.4       1.8       5.1        6
      1¼       13.4      16.8       2.8       1.8       5.1       6.5
      1½       13.4      16.8       3.0       2.0       5.6       6.5
       2       16.9      21.1       3.2       2.3       6.1        7
      2½       18.6      23.2       3.4       2.5       6.1        7
       3       21.1      26.3       3.8       2.8       6.1       7.5
       4       25.9      32.3       4.4       3.3       7.1        8
       5       29.3      36.6       5.2       4.0       8.1       12
       6       29.3      36.6       6.0       4.6       8.9       15

   2) End Shapes and Threads for American Standard

 

Nominal     Size      (inch)       Minimum Thread          Length    Chamber Diameter             F (mm) Maximum      Port  Diameter  Male End    N (mm) Minimum     Wall Thickness                 G (mm)             Bands

Minimum   Outside Diameter   H (mm)

Minimum    Width               E (mm)
  Female   B (mm)    Male   L (mm) Minimum Maximum
      1/8       6.4      6.7     10.3       11.0       5.1       2.1      17.6       5.1
      1/4       8.1     10.2     13.7       14.8       6.6       2.2      21.4       5.5
      3/8       9.1     10.4     17.1       18.3       9.4       2.3      25.8       5.8
      1/2      10.9     13.6     21.3       22.8      13.0       2.4      30.4       6.3
      3/4      12.7     13.9     26.7       28.1      17.5       2.8      37.0       6.9
       1      14.7     17.4     33.4       35.2      23.1       3.1      45.0       7.7
      1¼      17.0     18.0     42.2       43.9      30.2       3.4      54.7       8.7
      1½      17.8     18.4     48.3       50.0      35.3       3.6      61.6       9.3
       2      19.1     19.3     60.3       62.1      45.5       4.0      75.3      10.7
      2½      23.4     29.0     73.0       75.6      55.9       4.8      91.2      12.1
       3      24.9     30.5     88.9       91.4      70.6       5.3     108.8      13.9
      3½      26.2       -    101.6      104.1        -       5.7     123.0      15.3
       4      27.4     33.1    114.4      116.8      94.0       6.1     137.2      16.8
       5      30.0     35.8    141.3      143.8     119.1       6.9     167.2      19.8
       6      32.5     38.5    168.3      170.8     144.0       7.7     197.4      22.9
     * 8      37.3     43.8    219.1      221.6     190.0       8.4     246.0      24.8

* TM Specification
                                                                     <=Back      
    Tmis - High Grade Pipe Fittings
   
 © 2003 Thai Malleable Iron & Steel Co.,Ltd.. All rights reserved.